2. How do I get CoPilot to recognize my Bluetooth GPS receiver?
1. First, make sure you have a Bluetooth connection set up between your
Bluetooth GPS and your Pocket PC. See the FAQ number 1 under Bluetooth
for instructions if needed.
2. Open CoPilot Live on your Pocket PC.
3. Tap on the GPS button on the Welcome screen or tap on the GPS menu
at the bottom and select "Options"
4. On the "GPS Options" screen, click on "Setup GPS"
5. Check the option for "Automatic" and tap "Next"
6. If you successfully connect you will see this message "GPS connection
configured successfully. Select Finish to continue using CoPilot".
Tap "Finish" and then "ok" to begin using CoPilot.
7 . If the Bluetooth Manager pops up, tap 'BTGPS' and tap OK.
8 . Tap "OK" to return to the main screen.
9 . You know you're connected when you see small dots scrolling at the
bottom left of the main screen and it says, "Determining Current Position.".
You won't have to go through this process again unless you hard reset
your device. Be aware that there is sometimes a short delay for the time
it takes for the BLUETOOTH GPS to talk to the Bluetooth Manager.
VIEW CART