How do I create a connection between my Bluetooth GPS receiver and my Bluetooth
Manager?
1. Turn on the Bluetooth GPS by flipping the switch from '0' to '1'. Make
sure it's charging or that the battery is already charged. If the green
and blue lights turn on this means the GPS receiver has power.
2. Turn on Bluetooth Manager on your Pocket PC by tapping on Start> Settings>
System> Bluetooth> Turn on. You may need to perform a Soft Reset to your
Pocket PC.
3. Open CoPilot, tap on “Menu” ->”Options”->”GPS”->”Setup
GPS”->”Bluetooth”->”Next” and this will
begin to search for your GPS receiver.
4. Once the Bluetooth GPS is listed (BTGPS XXXXX), tap on it and click “Next”
and then “Finish” to complete the Bluetooth GPS setup.
*Note – These steps will not
work if you currently have a Bluetooth Connection made to the GPS receiver
from the Pocket PC’s Bluetooth Manager. If you already have a Bluetooth
connection to the GPS receiver in the Pocket PC’s device manager,
please follow these steps below before using the steps above.
1. Close CoPilot.
2. Open the Bluetooth Manager. Start->Settings->System->Bluetooth
Manager.
3. In the Bluetooth My Shortcuts screen, Tap and hold on the current Bluetooth
GPS connection and select “Delete”.
4. Perform a soft reset on the Pocket PC.
5. Follow the steps above to make a new connection from the Copilot program.
VIEW CART