ALK Technologies - Technology that Drives Transportation - GPS Navigation Evolved

How do I configure my GPS receiver to work with CoPilot Live| Pocket PC 6?

If you have a non-Bluetooth ALK GPS receiver, CoPilot Live will automatically detect the GPS receiver - no configuration is necessary.

If you have a Bluetooth GPS receiver or a GPS receiver that you purchased from another manufacturer, you will need to set the COM port and Baud rate for CoPilot Live to recognize the GPS receiver:

1. Launch CoPilot Live on your Pocket PC (Tap on "Start --> CoPilot Live")
2.Open CoPilot, tap on “Menu” ->”Options”->”GPS”->”Setup GPS”->”Other” ***Do not use Bluetooth because it will only work with CoPilot GPS receivers***
3. Tap on "Manual" and in the "GPS Com Port and Baud Rate" section; select the COM port and Baud Rate provided by the manufacturer or your GPS reicever. If you do not know this information, tap the "Automatic", then tap "Next" and CoPilot Live will attempt to search all available ports for your receiver.

Note: CoPilot will remember the GPS settings on exit, so you will only need to configure your GPS on the first use.